CAD Forum

Ömür Tokman

bnemec wrote: ↑Thu Sep 09, 2021 9:24 am How does it generate that list?

In a rough explanation:
A database is embedded inside each assembly and holds the assembly-related data there. probably this application searches for names in those databases and lists the databases (ie assemblies) it finds with the same name.

Ömür Tokman

You are actually correct. Chose "Rename." It gives you the list of "where used." (Why they didn't include where used as an option makes as much sense as anything else they do these days.) Make sure your "File Locations" is set properly. image.png I don't know why but t...

Ömür Tokman

I searched this forum and found this discussion: Solidworks Explorer - Does anyone really miss it? https://www.cadforum.net/viewtopic.php?f=52&t=438 Apparently SWX Explorer and the Where Used function are gone (I'm on SWX2021). Right now I have need of the Where Used function. Does anybody have...

Ömür Tokman

zxys001 wrote: ↑Thu Sep 09, 2021 10:29 am TRUTH!,.. bcuz, I just saw this...

that was nice

Ömür Tokman

At the risk of getting booted out of here I can only respond to this with educate yourself. Look at the clinical trials, read clinical reports, find governmental reviews etc etc etc. Do not listen to your local news, neighbors, twitter or Facebook as if this is the only information that exists and ...

Ömür Tokman

wow,.. amazing. grumph No vaccine is 100% protective, period. Currently...~ 0.001% fully vaccinated have died from COVID-19,..and ~ 0.005% fully vaccinated were hospitalized from COVID-19 Otherwise, you're 30-50X more likely to get Covid if you're not vaccinated.. or your risk are ~0.03 (death) and...

Ömür Tokman

zxys001 wrote: ↑Tue Sep 07, 2021 9:50 pm ... there is hope for you smokers..
https://www.nationalgeographic.com/scie ... acco-plant

Frankly, I don't want to be vaccinated, none of the processes in covid are convincing to me. I can't understand what they want to do to us.

Ömür Tokman

I've often wondered how this worked. The US has a population of 331M. We have 73M under the age of 18 and 47 million over the age of 65. This leave ~211m people. The currently labor pool has ~160m people in it. We have 51M people between the age of 18 and 65 that aren't working? I'd actually say th...

Ömür Tokman

Labor day in the US is about the celebrating "the workers" or, "“workingmen’s holiday” ... it was created mainly because of the slave labor of pre/post 1900. That is, it reminds everyone their WORKERS RIGHTS and about the poor way companies treated their workers during that period of...

Ömür Tokman

Glenn Schroeder wrote: ↑Fri Sep 03, 2021 10:24 am First Monday in September in the US.

Thanks for the info Glenn.

It seems that I will celebrate on May 1 in 2022.

Maybe one day I will celebrate it in September. hhhh

Ömür Tokman

Ok i get it.

Ömür Tokman

matt wrote: ↑Thu Sep 02, 2021 4:47 pm You might be thinking of Memorial Day, May 31. I always get those confused.

May 1 Labor Day in Turkey and Europe. i thought it was in usa.

Ömür Tokman

dpihlaja wrote: ↑Thu Sep 02, 2021 3:04 pm Have a great weekend y'all (Monday is Labor Day in the US, so many people have it off as a holiday). I am taking tomorrow off and traveling to the great Upper Peninsula of Michigan with my kids to visit my parents.

Hey Dan Isn't Labor Day May 1st?

Ömür Tokman

Tahhhd wrote: ↑Tue Aug 17, 2021 7:51 am Here is the schedule for the presentations!
image.png

Perfect.

Ömür Tokman

"IS THERE AN EASY METHOD FOR SHEET METAL CORNERS?" Yes. It's called Solid Edge. 2021-07-28 11_30_58.jpg SE contour flange.mp4 I'm angry and jealous. I feel like I've been thrown into the sea with my arms and legs tied. It should have been in SW. What if I turned the letter "w" s...

Ömür Tokman

Hmm not sure... If me i will most probably create using 2 Edge Flange feature (with the flange profile modified ) Hi Zhen, thanks I am also modifying the profile, if I am going to modify the profile why use two flanges? I can also make the elements that I show with the arrow in the sketch environme...

Ömür Tokman

Hi Guys, Good Days. This is how SW creates the sheet metal corners and I fix them later, because in real life sheet metal cannot be formed this way with the bending method. Actually SW should be able to do it, maybe there is an easy method that I don't know. This is how SW builds it. 2021-07-28_17-0...

Ömür Tokman

Select nearly anything, then hit CTRL A and it automatically filters for the type of thing that you selected and selects everything. Want to select all edges of a part file? Select an edge, and hit CTRL A. Want to select all faces of a part? Select a face and hit CTRL A. Want to select all notes (a...

Ömür Tokman

Thanks for all the well wishes guys, time to ride into the Sunset Want to get in touch, go to www.martinsroastapig.com John I saw this correspondence today, I hope you see my answer. You may not have SW in your life anymore, you may leave, but you cannot leave us. (you don't need to leave) <()> You...

Ömür Tokman

I don't know if I mentioned it before but I'm going to be rich soon.

Ömür Tokman

I'm a little excited to share with you guys a little video of a new innovation a few of my co-workers have developped. It's a trailer made to carry crushed cars. Truck drivers always had long time injuries from the endless strapping and unstrapping, swinging of the strap across and back. This adres...

Ömür Tokman

Kidding aside @Ömür Tokman, you can get the smaller one for 1/3 the price. Personally I don't see a need for all the extra buttons on the "Enterprise" version. I have mouse buttons that can handle all that. 2000tl is too much for a mouse, would you give $2000 for a mouse that is small wit...

Ömür Tokman

I also went to one once. I was with my son and daughter-in-law. I would not return without similar guides. If I went alone I would either never find what I wanted or become lost and wander around for days. ;; Frankly, my wife found the exit, I was so angry at that time that I was looking for someon...

Ömür Tokman

Thank you for your advice, it worked perfectly ! UU I used intersect to keep only one of the tangs, then flex, then circular pattern. Hi, If the help solved the problem, it would be more helpful if you confirm the correct answer. Thank you for your understanding. 2021-07-07_14-30-21.png

Ömür Tokman

KaMei wrote: ↑Wed Jul 07, 2021 2:42 am 1401835125613137922-png__700.jpg

I went to ikea once and decided not to go again. I was nervous. You cannot leave without visiting the entire maza for a shopping that will take 5 minutes in total. It was a nerve wracking experience for me.

Ömür Tokman

can you upload a file i want to see how it looks.
I use sw 2020

Ömür Tokman

Glenn Schroeder wrote: ↑Mon Jul 05, 2021 10:26 am Hello,

I find my SpaceMouse Pro .....

I've always wondered about these mouses, I don't think the boss will buy one since they are too expensive for Turkey.

Ömür Tokman

There was a similar program at my old workplace, but the accounting and production planning departments were using it for stock, sales. They had prepared product recipes, the product name was on the main list, when you clicked on the product, all the parts that made up that product were listed. (qua...

Ömür Tokman

bnemec wrote: ↑Fri Jul 02, 2021 10:56 am ..... add 1/4" to the width and length ....

I don't know how logical it is, but maybe

Ömür Tokman

You have to put "$PRP:" before a the custom property you want in the file name. You also have to enter the address of the folder such as "C:\New folder\DXFs". You had entered "D:" but you have to enter "D:\DXFs". "DXFs" is the folder the macro creat...

Ömür Tokman

Hello there, The macro below is artem 's This macro saves the sheet metal products in the assembly flat in a folder. I want to add sheet thickness and quantity to the file name you saved, I've been trying for about 4 days, but I still couldn't get a result. the quantity and thickness I want to add i...

Ömür Tokman

zxys001 wrote: ↑Sat Jul 03, 2021 10:09 am oh, btw, there is also the MS to do list.. (you may like it?)

Thanks for the reminder Paul I knew but I hadn't looked into it in detail.

Ömür Tokman

how to design camera in cad and give functionality to work as real camera.it captured things Which is moving on conveyor belt.in case if I am wrong please help me on topic how vision system simulation done . I don't think it's a feature of this system camera. An operation with software. First, a pr...

Ömür Tokman

...you reminded me about looking for something which I recall using.. it was a gantt to do list.... like this one. https://www.officetimeline.com/gantt-chart/templates/to-do-list I have a similar list, I designed it 5 years ago as it is an iso quality method requirement and it has been used in our ...

Ömür Tokman

As far as I know, dimxpert is used for dimensioning in 3D and showing it on the drawing page. so it doesn't matter how it looks in 3d environment.

did you try this?

Ömür Tokman

I think you also have to look at what the "Tasks" are and apply a system that is most effective and efficient. Keeping track of tasks for yourself that are generally independent from others is entirely different keeping track of your tasks that are inter-dependent with other which is enti...

Ömür Tokman

We have a saying "mind is better than mind" (two heads are better than one) The advice and ideas I get from you are methods that I can apply in the near future, if not today. Thank you all for your contributions. As far as I understand, people learn by experiencing the method that is pract...

Ömür Tokman

Bradfordzzz wrote: ↑Thu Jul 01, 2021 5:29 am Happy Canada Day Everyone. Hope you all have an amazing day !!

image.png

first time i hear this, what is it?

Ömür Tokman

I just read the article @matt posted on his blog: https://dezignstuff.com/is-a-data-addiction-really-useful/ . I agree ....... Hi Glenn thank you for sharing I could talk about this article, but I should have spoken the whole thing because every word was true. Nowadays, because people prefer to be ...

Ömür Tokman

I think bending the parts in assembly is not a healthy method. After I draw each part one by one and assemble the assembly, I make the necessary arrangements in the assembly (angles, holes, welds, etc.). flex is not a healthy command for me, at least for sheet metal, controllability is important to ...

Ömür Tokman

I tried many apps to keep track of my tasks. google Kanbanchi, MS To Do, Kanban Tasker, etc. Now I drag and drop the mails from otlook into a folder, I send the ones I sent to production to the done folder, and the ones that are waiting for approval to the pending folder. For now this is a more prac...

Ömür Tokman

jayar wrote: ↑Wed Jun 30, 2021 12:02 am Careful which analogy you use there; grass doesn't grow on concrete either.

hey man i'm not bald i just have a hair combing disability, that's all.
Please be respectful to the disabled.

Ömür Tokman

jcapriotti wrote: ↑Tue Jun 29, 2021 6:31 pm The picture looks like someone Amish. But if John is Amish, does that mean his CAD tools are:

image.png

I watched a documentary about them, people who deserve a lot of respect for me.

Ömür Tokman

Did you ever hear the saying, "Grass doesn't grow on a busy highway"? (Referring to the lack of hair on a busy head.) :D To tell people This is the answer I've been looking for for years! I love you my friend. I knew my brain was working too hard and leaving no energy in my hair, but I co...

Ömür Tokman

Ömür Tokman wrote: ↑Tue Jun 29, 2021 3:56 am Hi @Roasted By John
I wonder,
Does this hat have a religious meaning?
I usually see this hat in religious people (older generation).
2021-06-29_10-52-24.png

hey @Roasted By John i am curious about you answer.

Ömür Tokman

jayar wrote: ↑Tue Jun 29, 2021 4:51 am haha @Ömür, that just hides a severe pointed head that is bald. JK

Ha Ha Ha. @jayar Maybe not now, but in the near future I'll have to buy one too then.

Ömür Tokman

Hi @Roasted By John
I wonder,
Does this hat have a religious meaning?
I usually see this hat in religious people (older generation).

: 2021-06-29_10-52-24.png (7.35 KiB) Viewed 4951 times

Ömür Tokman

I could not open your file due to version diff But based on my understanding you would like to have a rib that go around the cylinder surface If it is a simple part, I would try to loft 1. Split line image.png image.png 2. Loft image.png image.png image.png Side note: I am using a top plane sketch ...

Ömür Tokman

Hi @Tera
I'm not sure as I can't open the file.
I was just wondering, have you tried unchecking it?

Ömür Tokman

Thank you very much everyone. It automatically throws 3 views in the Parasolid file and I can't prevent it. (no solution) Additionally, matt 's advice has been a great alternative solution for me. (a light went on in my head) Thank you very much CarrieIves for the template and I should mark his answ...

Search found 340 matches