CAD Forum

Ömür Tokman

Have you tried surface loft? I would draw the beginning, middle, end, 3 lines and inner and outer path. I'm not at my PC so I can't try it.

Ömür Tokman

Hi Bryan, Just an idea, you need to try it, you can check the hole diameters with solidwork api (macro). I think you can make the hole diameters other than the hole diameters you specify red. Edit: maybe https://r1132100503382-eu1-3dswym.3dexperience.3ds.com/community/swym:prd:R1132100503382:communi...

Ömür Tokman

Hello Gentlemen, An update. This time I'm doing things with a tlb reference file in C#. The first version was putting the cutting lengths in order and getting the result. I wanted to make a VBA that creates self-renewing combinations and actually I did it, but Excel was crashing when the combination...

Ömür Tokman

We bought this monitor because there were no discounts I expected in November. I liked the monitor and it is not a crude monitor as I thought. My eyes quickly got used to it. The only downside is that it has a bright monitor. I didn't pay any attention to this. If I had noticed, I would have definit...

Ömür Tokman

Hello everybody, I couldn't decide why I would write about this topic. I made an Excel macro that I've been thinking about for a long time and wanted to share it here. This macro places part profiles with cutting dimensions into one length profile with minimum wastage. The more parts that need to be...

Ömür Tokman

One day, while a man was walking on the road, his foot hit something. He got curious and picked it up. While he was cleaning the lamp, an angry genie came out of the lamp and said to the man; "I'm very angry today and I'm only giving you one wish, wish what you want and let me go." The man...

Ömür Tokman

Merhaba Omur, Personally, I'd get (2) 32" 4K (or 2K) monitor's... you can find them for ~$250usd each. (~$500 for both total) I share my 16" 4k laptop screen with this 4k LG 32UN500-W Monitor 32" UltraFine (3840 x 2160) Display, AMD FreeSync, DCI-P3 90% Color Gamut, HDR10, Built-in S...

Ömür Tokman

They found a few models I liked expensive, so we agreed on this model.

Ömür Tokman

I would get a 3rd 27" and use all 3. Assuming your video card will support 3 monitors. The truth is that a monitor needs to be purchased for the accounting department, but they do not want a 32" one. I turned this situation against me. :mrgreen: I made an offer to the accounting departmen...

Ömür Tokman

depends on distance and position from your eyes... 32 could be too big and to high forcing your neck to move or stress your eys The monitor will be 110cm away and I will adjust the vertical center of the monitor to eye level. I'm just worried about it looking rough, my only concern is whether it's ...

Ömür Tokman

gupta9665 wrote: ↑Wed Nov 01, 2023 5:25 am I would prefer 2 monitors instead of 1.

There will still be two monitors, but one is 27" and the other is 32"
I can't decide whether I should continue with two 27" ones or whether the 32" one will be too big or unusable.

Ömür Tokman

Hello everybody, I'm currently using two 27" monitors, but I'm thinking of replacing one with a 32" one. Currently, I sit at an average distance of 1 meter and 10 centimeters. I've never worked with a 32" monitor before, I can't imagine if I can get used to it or if it will be too big...

Ömür Tokman

Thank you for sharing, it is a very detailed macro

Ömür Tokman

There is no problem, everything is fine now, thank you again for sharing.

Ömür Tokman

The dimensions do not match the figure in the picture.
I added the 3 dimensions I pointed out as estimates. What actually is the measure?
When the measurements are applied, the tip gives a different result.

Ömür Tokman

Successful! thank you for sharing.
There's only one problem, at least it's me.
It works in all formats but not in "easm" format.
It reports that it is saving, but there is no result (it does not save in easm format.)

Ömür Tokman

Yes, I added that reference without removing it. Good thing you removed the reference and added it, I forgot to add it again.
Thanks Alex

Ömür Tokman

Maybe it'll be useful.

https://www.codestack.net/solidworks-ap ... s-to-part/

By the way, welcome to the forum.

Ömür Tokman

Might be worth exploring but since the "new" file would have a different name (New date & [possibly but not necessarily with internal revisions] new revision number) ....... Maybe you'd like to try it. You can call these codes as a function before saving. Or you can return a value and...

Ömür Tokman

Not a solution but just an idea. The save as command queries the existing same name and opens a window to save it to a different location if it exists.
Maybe.

Ömür Tokman

Frank_Oostendorp wrote: ↑Tue Oct 03, 2023 7:08 am Yes, runs smoothly now.
image.png

Thank you very much for the feedback. It's nice to be useful to someone, the qr code link is nice.

Ömür Tokman

Frank_Oostendorp wrote: ↑Tue Oct 03, 2023 5:52 am (Thanks, sorry but it throws another error. Let's see if Alex can test it.)
After clearing the select box of the missing reference, runs great. Good job.

image.png

Sorry, I didn't quite understand, is it working smoothly now?

Ömür Tokman

Would like to test it, but seems missing the QRGen file. image.png image.png You don't need to add any references. That reference is from a different attempt. I added a module to create a qr code, but if you need to add it too, I'm adding it here. image.png 2023-10-03_12-08-12.png 2023-10-03_12-09-...

Ömür Tokman

AlexLachance wrote: ↑Mon Oct 02, 2023 2:41 pm Awesome work Omur! I might give it a try and see if we could replace our bar codes with these.

I'm looking forward to your return, my mate.

Ömür Tokman

gupta9665 wrote: ↑Mon Oct 02, 2023 1:55 pm Thank you for sharing

Actually i thank you. This is such a small thing compared to what you have done for us. Mr. Gupta I learned a lot from you.

Ömür Tokman

Hello everybody, This is the macro I've been wanting to make for a while. First of all, I would like to remind you! I am not a programmer, the macro I made is to meet my needs. And it works well enough to meet my needs for now. It would be great if someone who understands the software could fill in ...

Ömür Tokman

AlexLachance wrote: ↑Mon Aug 14, 2023 10:37 am Are you on 2023 Omur? There's a setting In System settings>Feature Manager which would translate the feature names, maybe try that for the Russian characters?

Sorry for the late recycling Alex, I am using 2020. I will look into this method you mentioned.

Ömür Tokman

The assembly file is an assembly file created by someone that used SolidWorks Interconnect to create it before sending it to you. Maybe save as parasolid and then work from there, if possible. I sometimes use that technique when SolidWorks has a hard time translating geometry. Thanks Mate, Yes, I t...

Ömür Tokman

You may have to open each of the part models that it created in the assembly and then choose the disconnect from original file. Do you have the option for your customer to export it out as a parasolids perhaps. Another option may be to have your customer change the exort options if possible to flat...

Ömür Tokman

Hello friends, I need your support on something. There is a drawing (step214) coming from abroad, I can open the tool as assembly, but it cannot interfere with the parts. I need to turn every piece into sheet metal. If you enable 3D interconnect in system options, I can open the step file as an asse...

Ömür Tokman

[quote=zxys001 post_id=29366 time=1687352809 user_id=358
[/quote]

I thought flying cars were in trend and I didn't think technology would advance this much.

Ömür Tokman

Ömür Tokman

Ömür Tokman

Now I understand better why today's men desire gender equality so much.

Ömür Tokman

Basically, all of the commands that are available in RunCommand are the same as clicking the button in the user interface. You don't need any of the code in your macro except the one RunCommand line. All the rest of that does nothing. Sub main() Set swapp = application.sldworks swapp.runcommand [st...

Ömür Tokman

There isn't direct API call to set the component display mode. There is a SPR requesting it: SPR988885 - An API is required, on IComponent2, to allow setting component display mode As a workaround, you can use the RunCommand method: status = swApp.RunCommand (swCommands_e.swCommands_Comp_Display_Hi...

Ömür Tokman

I don't know much about spr and macros. copy-pasted and trial and error is my favourite. The code you gave did exactly what I wanted. Thank you very much my friend. The working code is below. Option Explicit Dim swApp As SldWorks.SldWorks Dim swModel As SldWorks.ModelDoc2 Dim swSelectionMgr As SldWo...

Ömür Tokman

Hello everybody! You are aware that I am not an active and very useful person for the forum, but I still wanted to ask my question here first. I thought I should ask here since it's the Macro section, if the section is wrong please let me know. I want to set the appearance of a single part I selecte...

Ömür Tokman

Hey John Stoltzfus,
Happy birthday

Ömür Tokman

*Please explain to me, how people can stand on buses while wearing a belt is mandatory in the car. *People think that by pressing the elevator call button many times, it will come faster. *I asked my mother, mother, am I adopted? My mother replied, "We wouldn't have chosen you if that was the c...

Ömür Tokman

This macro add a property named "Number" (you can change the property name) in all the components of the assembly and property value will be the one which a user fills in the input box. The value would be same for all the components. Yes now I get it, frankly I misunderstood the point, I ...

Ömür Tokman

JSculley wrote: ↑Mon Mar 20, 2023 8:16 am

Thank you very much mate this worked.
Perfect!!!

Ömür Tokman

gupta9665 wrote: ↑Sat Mar 18, 2023 8:15 am Try following codes (not tested but should work)

Hi Gupta,
This macro caught my attention, but I couldn't quite understand what it would do exactly, I tried it in a simple assembly, it added a number to the special properties of all parts (which I wrote).

Ömür Tokman

Hello guys, Have the best days. There is something I'm curious about, I'm talking about win10, when you right click anywhere on the pc, a menu opens and there is an additional section in it, we can create a new folder here or add a new word file, everything is normal until here. I want to add "...

Ömür Tokman

Hi Ömür, no problem for us, yet. but yes too much rain for many. More importantly, very sorry to hear all about the earthquakes around you :| I'm glad you're okay, I hope the people of the region get through this disaster without loss of life. And Thank you mate, we'er fine, i am far from earthquak...

Ömür Tokman

zxys001 wrote: ↑Thu Mar 09, 2023 11:05 am

Paul,
I saw a flood disaster on the news today. in san francisco, is it near you? are you okay mate?

Ömür Tokman

I don't remember how long it has been, but the same thing has been happening to me for a while.(chrome)

Ömür Tokman

Maybe I was late or just didn't notice.
Did you check?

Ömür Tokman

Take time for your loved ones because time will take you away from your loved ones one day.

Ömür Tokman

If the part is not symmetric then the mirror has to create a new part/configuration in order for it to display how you want it to. ... yes, I am using the same part by re-attaching it to the assembly, this is normal, but I think it should be able to do such a simple operation (at least I think it i...

Search found 336 matches