Deviation Analysis

User avatar
Maha Nadarasa
Posts: 193
Joined: Tue Mar 16, 2021 12:46 pm
Answers: 1
x 51
x 48

Deviation Analysis

Unread post by Maha Nadarasa »

Two separate flat surfaces are joint together. Joint between connections is tangent to each faces. However, according to Deviation Analysis joint at the extreme right end (green arrow shows) is 0.04 degree. What is the reason?

I assume this also should be blue arrow as well.
Attachments
XXXPart7.SLDPRT
(71.87 KiB) Downloaded 27 times
1.png
User avatar
jcapriotti
Posts: 1785
Joined: Wed Mar 10, 2021 6:39 pm
Answers: 28
Location: The south
x 1112
x 1936

Re: Deviation Analysis

Unread post by jcapriotti »

Maybe some kind of tolerance issue in the software. I tried several planar and even curved surfaces and it does the same thing if the edge is open ended. If the edge is internal to the surface and closed it doesn't.

2021 sp3
Jason
User avatar
Maha Nadarasa
Posts: 193
Joined: Tue Mar 16, 2021 12:46 pm
Answers: 1
x 51
x 48

Re: Deviation Analysis

Unread post by Maha Nadarasa »

It happens to closed edge as well.
Attachments
11.png
P66.SLDPRT
(125.23 KiB) Downloaded 28 times
Post Reply