One More Try...

User avatar
Roasted By John
Posts: 366
Joined: Mon Mar 08, 2021 3:21 pm
Answers: 1
Location: Lebanon PA USA
x 268
x 583
Contact:

One More Try...

Unread post by Roasted By John »

www.martinsroastapig.com
Pig Roast Your Way
MJuric
Posts: 1067
Joined: Mon Mar 08, 2021 3:21 pm
Answers: 1
x 31
x 873

Re: One More Try...

Unread post by MJuric »

Roasted By John wrote: Thu Mar 18, 2021 8:07 am https://r1132100503382-eu1-3dswym.3dexp ... IFQKwjYegg

[attachment=0]image.png
As I responded in the other forum...not going to do anything...but I used more words over there.
User avatar
mike miller
Posts: 878
Joined: Fri Mar 12, 2021 3:38 pm
Answers: 7
Location: Michigan
x 1070
x 1232
Contact:

Re: One More Try...

Unread post by mike miller »

Roasted By John wrote: Thu Mar 18, 2021 8:07 am https://r1132100503382-eu1-3dswym.3dexp ... IFQKwjYegg

[attachment=0]image.png
For your own health and sanity, promise me that this will be the last try. :D
He that finds his life will lose it, and he who loses his life for [Christ's] sake will find it. Matt. 10:39
User avatar
AlexLachance
Posts: 2044
Joined: Thu Mar 11, 2021 8:14 am
Answers: 17
Location: Quebec
x 2197
x 1900

Re: One More Try...

Unread post by AlexLachance »

They won't move an inch until it can be felt in their wallets. So don't hold your breath.
User avatar
Roasted By John
Posts: 366
Joined: Mon Mar 08, 2021 3:21 pm
Answers: 1
Location: Lebanon PA USA
x 268
x 583
Contact:

Re: One More Try...

Unread post by Roasted By John »

The same thing was said pre ONE TWO - but then we were talking to Americans, not Frenchmen - We didn't get immediate results but we got Mark Johnson on our side at SW Headquarters...
www.martinsroastapig.com
Pig Roast Your Way
User avatar
AlexLachance
Posts: 2044
Joined: Thu Mar 11, 2021 8:14 am
Answers: 17
Location: Quebec
x 2197
x 1900

Re: One More Try...

Unread post by AlexLachance »

What's wrong with frenchmen? :-P
User avatar
jcapriotti
Posts: 1798
Joined: Wed Mar 10, 2021 6:39 pm
Answers: 29
Location: The south
x 1138
x 1945

Re: One More Try...

Unread post by jcapriotti »

Any one want to takes bets on when some of these posts are gonna get moderated and yanked over there?
Jason
User avatar
DennisD
Posts: 685
Joined: Fri Mar 12, 2021 10:04 am
Answers: 1
Location: Near Jacksonville, FL
x 998
x 1434

Re: One More Try...

Unread post by DennisD »

jcapriotti wrote: Thu Mar 18, 2021 9:48 am Any one want to takes bets on when some of these posts are gonna get moderated and yanked over there?
ME FIRST! Look at what I just posted, calling out Gain Paolo Bassi and Bernard Charles.
Brick walls are there for a reason. The brick walls aren't there to keep us out. The brick walls are there to show us how badly we want things.
- - -Randy Pausch
User avatar
bnemec
Posts: 1882
Joined: Tue Mar 09, 2021 9:22 am
Answers: 10
Location: Wisconsin USA
x 2478
x 1354

Re: One More Try...

Unread post by bnemec »

DennisD wrote: Thu Mar 18, 2021 10:35 am
jcapriotti wrote: Thu Mar 18, 2021 9:48 am Any one want to takes bets on when some of these posts are gonna get moderated and yanked over there?
ME FIRST! Look at what I just posted, calling out Gain Paolo Bassi and Bernard Charles.
Can you post an image of it? I cannot seem to get to your post. :roll:
User avatar
DennisD
Posts: 685
Joined: Fri Mar 12, 2021 10:04 am
Answers: 1
Location: Near Jacksonville, FL
x 998
x 1434

Re: One More Try...

Unread post by DennisD »

Here is what I just posted in the "Is this forum moving to 3D SWYM?" thread https://forum.solidworks.com/thread/247614

I have nothing to lose. SWX cannot rescind my subscription to SWX. They cannot ban me from cadforum.net. They can ban me from the 3DSwamp, but I hardly even go there so that wouldn't be a loss either. I guess they could ban me from this forum and I would miss out on the next two weeks. Now THAT would hurt! />sarcasm=off

I believe the following to be true:
1. The new 3DSwamp forum is an unholy abomination.
2. It is the result of decisions made by people woefully out of touch with the very people it is intended to serve. Most of these folks are above SWX and reside in Dassault.
3. The noise we have been making has been getting attention at DSS. This is our only hope.

While I am not optimistic that any significant changes to the forum in the 3DSwamp will happen I do feel an obligation to try to make changes for our betterment. SWX used to listen to what we wanted. We need that back.

There have already been a lot of very pointed suggestions to make the new SWX forum better. I do not believe that much if any of them will actually be implemented within the framework of the 3DSwamp. So here is my real suggestion to SWX/DSS. Make an appealing SWX User Forum website, independent of the 3DSwamp. Make it work with our expectations and input. Make it at least as good as the forum we are currently using on Jive and the new one at cadforum.net. MAKE IT INDEPENDENT OF THE 3DSWAMP. Keep the 3DSwamp forum so that people within the swamp can find it, but make it a link to the new "off-site" forum that works for us.

There, I fixed it for you!

And since I have nothing to lose I will call you out, Gian Paolo Bassi and Bernard Charlès (c/o Ryan Priddy). I challenge you to read this entire thread and not just some excerpts. I challenge you to respond to us, your most passionate SWX users. What do you have to say about this mess?

(Having nothing to lose brings out the chutzpah! Is that French for balls?)
Brick walls are there for a reason. The brick walls aren't there to keep us out. The brick walls are there to show us how badly we want things.
- - -Randy Pausch
User avatar
jcapriotti
Posts: 1798
Joined: Wed Mar 10, 2021 6:39 pm
Answers: 29
Location: The south
x 1138
x 1945

Re: One More Try...

Unread post by jcapriotti »

@DennisD You need to post this on the new for......um......ugg...can't say it.
Jason
User avatar
Roasted By John
Posts: 366
Joined: Mon Mar 08, 2021 3:21 pm
Answers: 1
Location: Lebanon PA USA
x 268
x 583
Contact:

Re: One More Try...

Unread post by Roasted By John »

AlexLachance wrote: Thu Mar 18, 2021 9:38 am What's wrong with frenchmen? :-P
Not talking about Canadian Frenchmen, I'm talking the original Frenchmen... ;)
www.martinsroastapig.com
Pig Roast Your Way
User avatar
zwei
Posts: 701
Joined: Mon Mar 15, 2021 9:17 pm
Answers: 18
Location: Malaysia
x 185
x 599

Re: One More Try...

Unread post by zwei »

Well... i doubt this will changes anything, but i keep my hope up!
Definitely need to give a big kudos to @DennisD for shouting out GPB...

Things are getting busy again for my side, but I will still keep an eye on the whole forum migration stuff (and also marking my calendar to countdown the end of the forum) :?
Far too many items in the world are designed, constructed and foisted upon us with no understanding-or even care-for how we will use them.
User avatar
AlexLachance
Posts: 2044
Joined: Thu Mar 11, 2021 8:14 am
Answers: 17
Location: Quebec
x 2197
x 1900

Re: One More Try...

Unread post by AlexLachance »

Roasted By John wrote: Thu Mar 18, 2021 11:06 am
AlexLachance wrote: Thu Mar 18, 2021 9:38 am What's wrong with frenchmen? :-P
Not talking about Canadian Frenchmen, I'm talking the original Frenchmen... ;)
lol I'm just busting your ****s :lol:
User avatar
zwei
Posts: 701
Joined: Mon Mar 15, 2021 9:17 pm
Answers: 18
Location: Malaysia
x 185
x 599

Re: One More Try...

Unread post by zwei »

Wow...
image.png
Far too many items in the world are designed, constructed and foisted upon us with no understanding-or even care-for how we will use them.
User avatar
Roasted By John
Posts: 366
Joined: Mon Mar 08, 2021 3:21 pm
Answers: 1
Location: Lebanon PA USA
x 268
x 583
Contact:

Re: One More Try...

Unread post by Roasted By John »

They don't like spammers, but that is what they'll do when we all get corralled over there, they'll spam the money right out of our pockets.....

Spread the word
www.martinsroastapig.com
Pig Roast Your Way
Post Reply