"The sketch cannot be dragged because Automatic Solve Mode is off."

Post Reply
User avatar
bnemec
Posts: 1851
Joined: Tue Mar 09, 2021 9:22 am
Answers: 10
Location: Wisconsin USA
x 2436
x 1330

"The sketch cannot be dragged because Automatic Solve Mode is off."

Unread post by bnemec »

I'm getting into making SW Drawings and I'm using some sketch elements to help with annotations or detail/section views. I keep getting this warning frequently and I keep turning the Automatic Solve Mode over and over. I did go into system settings -> Sketch -> Turn off Automatic Solve Mode and Undo..... and unchecked that setting. I still get this dialog over and over when sketching in drawings. Any suggestions?

Thank you.

image.png
image.png (7.07 KiB) Viewed 1269 times
Top
Lapuo
Posts: 109
Joined: Tue Mar 09, 2021 2:06 am
Answers: 0
x 176
x 106

Re: "The sketch cannot be dragged because Automatic Solve Mode is off."

Unread post by Lapuo »

You have same option in System options - (Drawings) - Performance
Did you try to clear it there?
Top
Post Reply

Return to “2D Drawings”