CAD Design for Aerospace project

[Frederick_Law]

Building replica of a replica?
1:1?

[Glenn Schroeder]

Is anyone else getting flashbacks of the project recreating every intricate detail of the Texas School Book Depository building?

[Frederick_Law]

I'm waiting for JFK to popup .....

[SPerman]

He hit a bunch of sites. He actually bothered to introduce himself at one of them.

https://groups.io/g/quicksilverultralig ... sage/56954

https://www.barnstormers.com/classified ... atid=22987

https://www.euroga.org/forums/hangar-ta ... ost_322266

[Glenn Schroeder]

He hit a bunch of sites. He actually bothered to introduce himself at one of them.

https://groups.io/g/quicksilverultralig ... sage/56954

https://www.barnstormers.com/classified ... atid=22987

https://www.euroga.org/forums/hangar-ta ... ost_322266

. . . and at the Swamp: https://r1132100503382-eu1-3dswym.3dexp ... HaTZ9plBzQ

[matt]

People, don't chase ghosts here. If you can help, help, don't track other unimportant things like mad dogs.

Just as a note, if you're going to come in here and ask for free help for something that it sounds like you should be able to do yourself, your first move shouldn't be to criticize the people you're asking for help.

[Tom G]

To convert PDF's to DWG, I recommend using an affordable product, Print2CAD. I use this to make parts from quality PDF's. It works best with vectored content, but it tries to handle raster content such as images as well. If all that you have is raster content, I do not recommend it.

[SPerman]

[Glenn Schroeder]

Then it means you're just an amateur and you don't belong here. Hatred towards doing something for free will bring nothing for you in life, unfortunately. And that's the first bad news.

You're absolutely right. He's an amateur. @matt has only been doing CAD since about the time it started.

And as far as not belonging here, it's his forum, so he kinda does.

[jcapriotti]

Then it means you're just an amateur and you don't belong here.

Matt is an amateur

[SPerman]

Maybe you've read one of his books?

image.png (172.21 KiB) Viewed 8458 times

image.png (109.95 KiB) Viewed 8458 times

image.png (178.8 KiB) Viewed 8458 times

image.png (158.08 KiB) Viewed 8458 times

image.png (162.5 KiB) Viewed 8458 times

[matt]

Then it means you're just an amateur and you don't belong here. Hatred towards doing something for free will bring nothing for you in life, unfortunately. And that's the first bad news.

Well, two things.

First, you should contact the guy who runs the forum and tell him amateurs are picking on you. And tell him you're a real pro. Then cry a little, he's an old softie. He'll get those bad amateurs for you. (pink is the new color for baby talk)

Second, asking for free help to do amateur work and then calling someone you don't know an amateur?

I've forgotten how much fun this can be. We need to have this guy stop by regularly for a blanket party.

[Glenn Schroeder]

Well, two things.

First, you should contact the guy who runs the forum and tell him amateurs are picking on you. And tell him you're a real pro. Then cry a little, he's an old softie. He'll get those bad amateurs for you. (pink is the new color for baby talk)

Second, asking for free help to do amateur work and then calling someone you don't know an amateur?

I've forgotten how much fun this can be. We need to have this guy stop by regularly for a blanket party.

I started to click on"Like", but then realized I don't know what a blanket party is.

[SPerman]

I started to click on"Like", but then realized I don't know what a blanket party is.

Have you seen "Full Metal Jacket?"

[Glenn Schroeder]

Have you seen "Full Metal Jacket?"

I have not.

[matt]

I wonder where @marianmadalin32 went to? I hope he's coming back. He was fun to play with.

[Frederick_Law]

And that's the first bad news.

[DennisD]

[Frederick_Law]

Still why build a replica of Jurca Mustang Replica?
Why not the real P-51?
The Jurca Mustang Replica is a flying wood P-51. If you want to build one and fly, yes. For static display? Why?
Would be cool to build flying wood F-14.

[zxys001]

Free?... hmm... although, it's fun to play (something I had recently from a mesh file via SketchFab.
)

[dave.laban]

Is anyone else getting flashbacks of the project recreating every intricate detail of the Texas School Book Depository building?

Happy memories.

https://r1132100503382-eu1-3dswym.3dexp ... 4Qou_fAArA

https://r1132100503382-eu1-3dswym.3dexp ... uQAwNwQ5eQ

https://r1132100503382-eu1-3dswym.3dexp ... Xms89CoFTQ

[Frederick_Law]

Looks like they're looking for slave, not volunteer.
They failed to realize volunteer are investor also.
They invest their time in the project.

So instead of looking for free labour. Look for more investor who believe in your project and willing to invest.

[AlexLachance]

People, don't chase ghosts here. If you can help, help, don't track other unimportant things like mad dogs.

Before asking for help, try getting involved within the communities, that perhaps would get you much further and even perhaps facilitate finding help.

You want people to participate for free, but you're unwilling to participate in the places you ask for help.

[AlexLachance]

Then it means you're just an amateur and you don't belong here. Hatred towards doing something for free will bring nothing for you in life, unfortunately. And that's the first bad news.

Except he's the one who created this whole site and I'm pretty sure he has more knowledge in his pinky the the person asking for free help everywhere and belittling people who question his project.

[zxys001]

Except he's the one who created this whole site and I'm pretty sure he has more knowledge in his pinky the the person asking for free help everywhere and belittling people who question his project.

I'm imagining a 3D printed diorama of the dallas scene in his bedroom,.. Never mind, someone has it already using lego pieces.

[SPerman]

It looks like he's actually trying to start an aerospace museum in Romania. I think he would have found a completely different response from this group if he had spent just a little time introducing himself and his project. After seeing the personality he displayed here, I'm not surprised he is struggling to get the project off of the ground.

https://aerospot.eu/?lang=en

[Frederick_Law]

And who gave you the permission to post that link ? Or do you think you have the right to do anything you want ???

Who need any permission to post any link?
You are all about free but other need permission to post/use a web link? Which is "free" for anyone to use?
I don't understand.

[Glenn Schroeder]

@SPerman, and almost very other person on this forum, has spent untold hours helping people learn how to use whatever CAD software they're having problems with. I've been doing so for almost 15 years, and others have been doing it longer.

If you had come here asking for help doing something you were attempting to do for yourself you would have had all the assistance you wanted. However, we are much less enthusiastic about doing people's work for them.

If you don't know anything about CAD, but just want us to do the same work for free that we do to pay bills, you're probably barking up the wrong tree. With the attitude you've displayed I doubt if you could hire anyone to do it.

[cadforumadmin]

Because of unassumed people like you, who did not do any free stuff for anyone on this planet, who live for nothing and don't deserve to live I am struggling. If you hear of the word "free", you act like a devil... So be it, the devil on you ! If you can help, help... If not, go chase ghosts elsewhere and mock elsewhere... And who gave you the permission to post that link ? Or do you think you have the right to do anything you want ???

Consider this a warning. You can't come on here and post stuff like this, regardless of who you think you are. Your next inappropriate post will cause your account to be deleted. Please read the rules https://cadforum.net/viewtopic.php?t=11

CadForumAdmin

[matt]

Consider this a warning. You can't come on here and post stuff like this, regardless of who you think you are. Your next inappropriate post will cause your account to be deleted. Please read the rules https://cadforum.net/viewtopic.php?t=11

CadForumAdmin

UPDATE: I re-read the post and the list of people he has insulted, and just decided to delete the account. If you see him around, tell him I said BYE.

[AlexLachance]

UPDATE: I re-read the post and the list of people he has insulted, and just decided to delete the account. If you see him around, tell him I said BYE.

Awww That was quite entertaining

[Frederick_Law]

Great to do something with nothing.
Not good to think the world own you something.

I wish someone is willing to pay all my bills .....

[Glenn Schroeder]

UPDATE: I re-read the post and the list of people he has insulted, and just decided to delete the account. If you see him around, tell him I said BYE.

I think my tender feelings are hurt. He hadn't gotten around to me yet.

[SPerman]

Maybe it is a cultural thing where they don't respect you if you don't insult them on introduction.

[jcapriotti]

Maybe it is a cultural thing where they don't respect you if you don't insult them on introduction.

Now that's straight outta Star Trek there.

[SPerman]

[Glenn Schroeder]

UPDATE: I re-read the post and the list of people he has insulted, and just decided to delete the account. If you see him around, tell him I said BYE.

Done: https://r1132100503382-eu1-3dswym.3dexp ... dgY7-jbZPg

[josh]

Oh man, I missed my chance to get on the list!

[jcapriotti]

Done: https://r1132100503382-eu1-3dswym.3dexp ... dgY7-jbZPg


image.png

Did they remove the post on 3dx as well?

[AlexLachance]

Did they remove the post on 3dx as well?

Not yet, doubt they will too
https://r1132100503382-eu1-3dswym.3dexp ... qV1fOy_r2g

[Glenn Schroeder]

Did they remove the post on 3dx as well?

I may have posted the wrong link. Let's see if this one works: https://r1132100503382-eu1-3dswym.3dexp ... qV1fOy_r2g

[Frederick_Law]

https://www.facebook.com/marian.madalin.75470


Funny what a quick Google can find.
https://www.academia.edu/41894839/Bucha ... ace_Museum

If you don't want other to find your $hit, don't put your $hit on internet.

Website not bad.
https://aerospot.eu/

[Glenn Schroeder]

He's back at the Swamp, and getting about as much help as you'd expect (nice comment from @josh).

https://r1132100503382-eu1-3dswym.3dexp ... s7Yi1etSDg

[AlexLachance]

He's back at the Swamp, and getting about as much help as you'd expect (nice comment from @josh).

https://r1132100503382-eu1-3dswym.3dexp ... s7Yi1etSDg

Thanks for the share Glenn, this guy is a national treasure.

[zxys001]

He's back at the Swamp, and getting about as much help as you'd expect (nice comment from @josh).

https://r1132100503382-eu1-3dswym.3dexp ... s7Yi1etSDg

[Frederick_Law]

People are too entitled.
You have to help me when I ask.

On the "neighbor" app, people are complaining price of tomato and want government to cut Ukraine funding so tomato will be cheaper.
While other fighting for their home and life, we'll let them die so we can have cheap tomato.

[AlexLachance]

Gosh darnit they seem to have banned the guy...

[Glenn Schroeder]

Gosh darnit they seem to have banned the guy...

That's a shame. He was pretty entertaining.

[Frederick_Law]

On the news.
Replica plane crash landed.
https://globalnews.ca/news/10335808/pil ... ers-field/

[Glenn Schroeder]

On the news.
Replica plane crash landed.
https://globalnews.ca/news/10335808/pil ... ers-field/

The first line of the article says "A situation which could have ended a lot worse has a happy ending after provincial police say a pilot walked away uninjured after a plane crash on Monday." I suspect the farmer didn't consider it a happy ending.