Cursor Tracking Problem when entering a sketch
-
samtheman1
- Posts: 2
- Joined: Sat Jul 31, 2021 12:58 pm
- x 1
Cursor Tracking Problem when entering a sketch
As you can see from the image attached, there are lines in the x and y directions that follow the cursor when i select a sketch shape.
- Attachments
-
another example[146].pdf- (1.6 MiB) Downloaded 67 times
-
- solid edge cursor problem forum submissi.pdf
- (3.68 MiB) Downloaded 64 times
-
samtheman1
- Posts: 2
- Joined: Sat Jul 31, 2021 12:58 pm
- x 1
Re: Cursor Tracking Problem when entering a sketch
Any advice is welcomed. I truly dont know where to start to fix this
Re: Cursor Tracking Problem when entering a sketch
I'm guesting that you have an NVidia graphics card?
Regardless, I suspect that you do not have the latest graphics driver for you graphic card. Update your driver with the latest available from the graphics vendor not from the computer manufacturer.
Regardless, I suspect that you do not have the latest graphics driver for you graphic card. Update your driver with the latest available from the graphics vendor not from the computer manufacturer.
-
Glenn Schroeder
- Posts: 1444
- Joined: Mon Mar 08, 2021 11:43 am
- Location: southeast Texas
- x 1629
- x 2044
Re: Cursor Tracking Problem when entering a sketch
See if anything at https://www.cadforum.net/viewtopic.php?f=17&t=98 will help.
"On the days when I keep my gratitude higher than my expectations, well, I have really good days."
Ray Wylie Hubbard in his song "Mother Blues"
Ray Wylie Hubbard in his song "Mother Blues"
-
Jaylin Hochstetler
- Posts: 383
- Joined: Sat Mar 13, 2021 8:47 pm
- Location: Michigan
- x 375
- x 353
- Contact:
Re: Cursor Tracking Problem when entering a sketch
I've had this happen when I was sketching a line or shape and I moved my 3D Mouse and my regular mouse at the same time.
A goal is only a wish until backed by a plan.